|
how is your player connected?
i am assuming you are playing this back through an analog connection to your receiver/pre/pro, correct? and you have at least 3 analog lines connected; front L+R and a sub, correct? because, if you're using a digicoax/optical connection, there is no bass or time management applied to the digital output from the player. to apply bass/time management to the digital output, you need to use your receiver/pre/pro.
otherwise, i CAN use my 2200 to play stereo CDs via my analog connections WITH the fronts set to large and WITH a sub channel.
leave it set up as "multichannel". set your fronts to LARGE. set your center/surrounds to whatever you have, small or large. if you have none, then set those to "none". leave the filter set to on. then set the "bass enhancer" feature to "on" to create your sub channel.
mine works fine this way; i just checked it. if you're being blocked in the player's menus from doing it, then some other setting is preventing it. when the front speakers are set to SMALL, the bass enhancer does nothing, really, whether on OR off, btw.
(and, i'm not sure if it makes a difference or not relative to your problem, but have you applied the firmware?)
"All men are frauds. The only difference between them is that some admit it. I myself deny it."
|