View Single Post
Home Theater Forum
Old 04-27-2004, 11:33 AM   #95 of 198
Humphrey
Member
 
Location: Central Texas
Join Date: Jun 2003
Local Time: 10:32 AM
Local Date: 12-01-2008
Posts: 228

The plastic sheets was what I was thinking as well. To add to it I know you can get sanding equipment that use a shop vac to filter the air. It attaches to the sander itself so the majority of the dust gets trapped. To add to that find somebody that has a Rainbow vacuum cleaner and use it in it's air filtration mode on the sanding side of the plastic sheeting to capture the rest of the dust. A wet/dry vac with a little water in the bottom would be a choice as well but not as good as the way the Rainbow's water trap function works. I've seen really inexpensive filter systems built with just some carboard, a box fan, and some ac filters as well. So there may be more than just a few ways to skin this cat.

Of course you could try one more coat of the paint to see if it helps, from a fresh supply of the paint. It sounds like maybe the 3rd coat came from a different can and it wasn't the same as the first two?



Humphrey
Austin & San Marcos, Tx

Panasonic AE900 720P, 120" Screen, PS3 Blu-Ray, HK AVR635, 7 Mirus Audio Debrios, 2 Soundbridge Subs (for now), Oppo DVD, all in the Smallest HT in Austin (that I know of) at 10x11 feet.
Humphrey is offline Quote this post in a PM Send Support Ticket Reply With Quote sendpm.gif
Home Theater Forum
Home Theater Forum
Home Theater Forum