|
Hey Chad
Like Justin said, your speakers should go to your receiver.
You said that you don't have a subwoofer now, so all you need is a cable from the receiver's sub output to the plate amp "line in". There should be a red and black wire coming out of the back of the plate amp. They attach to the base shakers in a series circuit.
Once connected correctly you can adjust the crossover (frequency) to how much shake you want.
"I plugged the audio cable from the receiver to the left-most red rca connector, which is labeled 'input'. Is this correct?"
No. Try the way I Stated above. good luck
rick
|