|
Here is what I am going to build for my brother in law as soon as it warms up.
15" dayton quatro, 5.5-6cuft ported box, 250 watt MCM amp (only $89, can't beat that)
The box sounds big but externally it will be just under 2 ft per side with bracing included in the calcs, It will only consume one piece of MDF to build. Output will exceed 110db with an F3 of 22-23hz, not bad for about $200-$225usd (I don't know what the excange rate is), you could also lower the F3 to 20 by upping the box size a little if you desire, I figure with room gain the 5.5 cuft box should have an F3 below 20.
Have fun
|