|
The cable should work fine as long as your 'audio' application is for line-level signals, not speaker-level.
I've looked into multi-coax bundles for people with projectors. I emailed BlueJeansCables about combining Component, SVideo (using a SVideo breakout "Y" adaptor), and composite into a single, thick cable. Their answer was that such a cable IS possible, but the SVideo is hard to wire (because the RG6 coax is so thick - hence the breakout idea). Also, this many coax's in a single bundle is very thick/stiff/heavy. Many of the little desktop projectors are lightweight in comparison. That cable can likely whip the projector around unless you are careful about strain-relief. (Yes, the PDF file says it's flexable - it might be ok).
The other trick that makes the difference between a so-so and superior video cable is finding a good RCA plug that matches the dimensions of the coax.
Before you buy:
- Call the company and ask if they have a RCA plug compatability chart. This may tell you what Canare RCA plugs fit that coax. If not, ask for a cross-reference chart to Belden coax, then go to the Belden web site and look at it's RCA plug cross-reference chart.
Only after you find a matching RCA plug should you buy the coax. Good cables are a system of good coax and matching RCA plugs.
|