Home Theater Forum - View Single Post

Joe Szott · 04-08-2003, 06:53 PM

John,

I think that a DVI to DVI connection should be fine. Only catch is be sure that the resolutions and refresh rate you use on the computer is acceptable before you hook it up to the RPTV. Remember that most TVs refresh at 60 Hz, if your video card is pumping out anything above that, it could be destructive.

There is a list of resolutions and refresh rates over at the avsforums, sorry but I don't have a link to it.

**HTF Ads**

04-08-2003, 06:53 PM	#5 of 5
Joe Szott *Joe S.* Member Join Date: Feb 2002 Local Time: 03:28 PM Local Date: 11-23-2008 Posts: 1,990	John, I think that a DVI to DVI connection should be fine. Only catch is be sure that the resolutions and refresh rate you use on the computer is acceptable before you hook it up to the RPTV. Remember that most TVs refresh at 60 Hz, if your video card is pumping out anything above that, it could be destructive. There is a list of resolutions and refresh rates over at the avsforums, sorry but I don't have a link to it.