Quote:
|
Do you have hardware video acceleration enabled? If so, maybe try disabling it in the Cinemaster Control Panel or options and see if that helps.
|
I believe acceleration is enabled, but there is nowhere in the cinemaster program that allows you to disable it.
Quote:
|
I assume your DVD-ROM drive has DMA enabled? It may be possible that Windows "decided" to disabled DMA (in PIO mode) causing the stutter.
|
I followed the instructions from this website to check DMA:
http://www.cdrlabs.com/phpBB/viewtopic.php?t=7625
I'm not sure I understood what was going on. Under IDE ATA/ATAPI Controllers, There was "Intel(r) 82371AB/EB PCI Bus Master IDE Controller," "Primary IDE Channel," and "Secondary IDE Channel." The second two were the only ones that had listings for DMA settings. Under Primary IDE Channel, both device 0 and 1 were working under Ultra DMA Mode 2. Under Secondary IDE channel, device 0 was working in PIO Only and device 1 was working in Multi-word DMA mode 2. No matter what I did for device 0 under Secondary IDE channel I couldn't get it out of PIO mode.
I don't know if there's much I can do from that angle.
By the way, here is the DVD program I am using:
http://www.cifelli.com/support/c3.x/...0Installer.zip