Posts by Paul_C

Hello; That sounds like a nice setup. My room is 13'6" X 20'. I have 1 row of 4 Berkline recliners at about 13' and a back row of 3 real theater rocker seats. The front row has about 1.5' on each side. As you can see, my setup...

Hi; I am not an electrician but I spent many hours reading forums like this and this is what I ended up with. 2 - 20 amp circuits just for the av rack and projector. I use regular plugs because I don't have any amps that...

Are the cables withing 2 feet of regular electrical runs? If they are and they run parallel for any length this could be introducing the noise you are experiencing. Other than that, the cable could be the issue. Good luck, Paul.

This is the support page. http://www.oppodigital.com/opdv971h_support.html Tells you how to update the firmware and what the latest verions is and what was changed. Paul.

Make sure you have the latest firmware update for the DVD player. I know they put one out not long ago. Good luck. Paul.

Hello Eric; You have a real problem with a square box. If the walls haven't been finished yet you might want to consider changing the dimensions of the room to get away from the box problems. Other than that, Absorption on the...

Mine is (Drywall is finally primed) almost 14' by 20'. First row seats 4 and second row seats 3. I have about 6 inches to the back wall. I used real theater seats for the back row. Good luck. Paul.

I just finished insulating my HT with this product. I used 9 bundles of this in my ceiling and one wall. It was easier to use than fiberglass insulation. It is not as itchy. I would highly recommend that you use a mask of some sort...

Hi; I just finished insulating my HT with "Safe and Sound" Roxul. I am also betting that this is what the contractor meant. Good luck. Paul.

If you have the space to do a room within a room thats great. If you don't then do a staggered stud wall. You still get separation of the room and there is only a physical connection at the top and bottom plates. Instead of using...