Robert
Today, I installed a new antenna rotator and balun. I can now receive
my digital channels 8 and 43 that I couldn't since the old rotator broke. However, the analog channels
are still have horrible reception on all local...
Robert
I'm using the antenna connection to the receiver. The satelllite connection connects elsewhere.
It's set like this on the menu:
Local In 1 (IN FROM ANT): Antenna
Local In 2 (SATELLITE IN): None (I chose None since the...
I bought a new balun and a rotator, but before I did anything, I decided to connect my roof antenna to a regular analogue TV (rather than through my 7 year old Mits SR-HD5 receiver that it always went to) and most of the analogue...
As a brief follow up for anyone with the same problem, I made the receiver see the OTA antenna again, but I deselected the analog local channels, but kept the HD channels selected. So now the WMC doesn’t get confused by recording the...
Robert
Thanks for the manual.
That should work. I'll let you know Tuesday when I'm back home.
My OTA antenna is a Channel Master 5646 mounted on the chimney, almost 3 stories up, but the Radio Shack rotator stopped working...
Robert
I didn't know that about the guides. The receiver is a Mits SR-HD5 and it's about 7 years old. It does have the channel numbers listed.
So for example, for local channel 8, I have 2 channels numbers; the satellite 8...
I didn't know that about the guides. The receiver is a Mits SR-HD5 and it's about 7 years old. It does the channel numbers listed.
So for example, for local channel 8, I have 2 channels numbers; the satellite 8 (HR8) and the antenna...
