Posts by Zbigniew

Edwin, 30k is _not_ a high budget, but rather average :-). High will be much closer oer in excess of 6 digits.. Check JS audio in Bethesda 301-656-7020, http://www.jsaudio.com/; also Soundworks in Kensington, MD 301-929-8600...

I use Servo driven by Lexicon MC-1, music only. Once calibrated (no x-30 in the signal path, only Lex :-) it is there - running at this same level as other speakers (4xActive-40, 2x Studio ADP). From time to time I would take...

You certainly can use a 5-chan amp to bi-amp main speakers. In my case I am using a parasound 2205 to run front speakers - biamping each of Monitor 9 :-). Works like a charm, and if I want to wake up my wife in the middle of the...

To answer original question: Yes, you can. For longer runs between rooms/floors, use decent RG-6 cable.. from Home Despot, or if you do not feel like doing it yourself, give Brad from BetterCables a call. Now I must admit -...

howdy, I got a hold of a used Lexicon MC-1 - since my rig is only used for music, with sources beeing a rack full of CD-changers running through DXS (very nice digital cross connect from Nirvis), and a record player waiting for an...

In my case, I am using Active 40's on a nice wooden stands, found in Home Depot for an amazing price of $20 a piece. They not only work great, but also are a nicoe storage for some coffe table books. Take a look at:...

there are quite a few autoswitchers. The best one was from Nirvis, famous DXS - no longer in production, and if you can find a used one, just buy it. Then there are MSB digital director units, Neutek units, and probably a few...

OK, I know I should do it earlier, but... Anyway: looking to buy used/new/B-stock RP-82. Be kind... Thanks, _zjt

Brajesh, I will be happy to take Rp-82 from your hands. I just send you an e-mail... Looking forward to your replay. _zjt

Mike, your receiver allows you to configure crossover at different frequencies - from 40 to 120. You will need lot of patience, but you can set it nicely. 1) You can run fronts as large, and still define sw, and decide with...