I just recently upgraded to a receiver that decodes HD sound. Using the Onlyo sc-886 pre amp with a sunfire power amp.
Now..... i almost only use it for blu ray and dvd movies.
When playing blu ray, its usually TrueHD 5.1 og 7.1...
Im considering the Denon AVP A1HD as a pre. For some reason Denon thinks all europeans want their equipment in silver, which really wouldnt match the rest of my equipment, so its not an option for me.
Does anybody know is the US or...
Actually i dont want to use 2 subs to get more bass, but to even it out thought out the room more.
When I meassure the svs alone there are some drops at some listening positions at different hz, probably because of my room, furniture...
Tried and run the testsignal again. I get these numbers, on the same sound level. I ran them 3 timers:
The PB13 Ultra alone / The Svs and servo together:
20 hz - 75 db / 75 db
30 hz - 77,1...
They are on each side of the screen but placed somewhat assymetric.
They are both in fase with each other and with the front/center speakers, so basically there is no problem. No decrease of bass at any hz.
I find it very hard to...
Thanks. Im experimenting with it right now.
I tested from 20 hz up to 80 hz and I get an db increase at every stage (every 10 db), so there is more bass using 2 all over.
But maybe I should just go with the svs and then turn it...
The Svs PB ultra13 finally arrived at my home yesterday. Now im trying to get it to work with my paradigm servo 15.
When calibrating the speakers are set to 75 db om a test signal, and using one sub the output is around 80. Ok, using...
