Posts by Ben Ch

Exactly, lowering the system Q is why I'm prolly going to need to implement a LT into my ADA. The manual is kinda vague about it, and it's insertion. I'll check your links. But since this is your thread, not mine, I'll discuss yours...

David - did you conjure up the LT cct? I have a ADA 1200 that I'll be using with a pair of dual 4 ohm Soundsplinetr RL-p's in a sealed config and might be interested in implementing the LT if needed. I have a BFD already, but may...

I guess I owe you and Larry Fine an apology - I linked a pic of the back of his rack, not mine. you get the idea how he framed in a "window" with door frame material and used trim around the face of it on the outside, his rack is just...

do a quick search for the FineRack on the 'net. here's a pic of mine...

Would you consider Applied Digital's Ocelot or Leopard controllers? they are computer programable with If - Then type language (Boolean logic?), run stand alone afterwords, can learn and receive IR and emit IR or X-10, receive X-10 and...

Parker, I don't think Adam was referring to the "security" of PM's, but rather the stability - at least lately... the recent server upgrades (and not) wreaked havoc on a couple of PM's we were trying to send/receive. Problems are...

Adam, what controls your fan/light combo now? (two switches on the wall, or one switch to power up the light/fan and pull chains on the device to operate each individualy?). if not the latter, then an IR543 (X10 device) and a pair of...

Dave, by chance did you happen to reply to the wrong thread? It's not my birthday, but yes - my eyesight is starting to fail...

How low should a dual 15" sealed sub be expected to go? Unibox says of two 15" Sound Splinter RL-p D4's wired for a total load of 4 ohms, powered with a 1200 watt amplifier in a 350 liter box (approx 12.5 ft^3) should have an F3 of...

ok Thomas, I hadn't seen Pete's MTM's... I'm sold. Too bad the pic is in front of those gorgeous line arrays.