Posts by Robert P. Jones

From what I read of the notice linked to in my post, the exposed metal parts of the outside were prevalently mentioned. Perhaps one model is more plastic on the outside while another is more metallic. It seems to be based on a...

All I know is what the link is saying. There are contact numbers there to call about such things, I believe. The only thing they can replace such things with would be newer versions of same, I would think. Equal or greater value,...

IF YOURS IS ONE OF THE MODELS AFFECTED, YOU GET A NEW ONE FREE! http://www.cpsc.gov/cpscpub/prerel/prhtml03/03544.html Mr Bob

quote: quote: -------------------------------------------------------------------------------- You could try an ISF course. You need the tools and the experience, and that's not really...

Drives and cutoffs per each individual color are what control grayscale, sometimes also called gain and bias. Drives/gains control the strong, "white" light levels, cutoffs/biases/screen trimpots on the focus block control the dark...

Yes, except that registers keep disappearing the SM's lineup, on the Mits's. Other than that, the only differences will be that the same thing might be found under another register number, model to model. They don't change their...

Try Menu 2157, 2257 or 0357. Hit menu again to exit. No registers will be changed unless you tell them to be, in this menu. (Unlike the xx59 menu, where any changes you make get automatically saved once you exit the menu.) Mr Bob

What model number are we talking about?

There is no such thing as green convergence. There is green geometry, and there is red and blue convergence, either red or blue to green or blue to red, after red to green. Fortunately in your case, on the Mits's the red and blue...

My brother lives near Sunset Blvd in LA. I believe that is West Hollywood? Somewhere near Santa Monica? I was just down there a couple weeks ago! Send me some contact info to my email address and I can look you up next time I'm...