New Posts  All Forums:

Posts by kurtZoom

I got the PF60 before the price jump and couldn't be happier. No UPS capability, no super noticible PQ or Audio change...it is more for protection and convenience. It has a lot of set up options with outlet switching and delays. Just...
At first I was wondering if the supplier didn't send me the wrong pins...because I bought a bunch of the L-5CFB/RCAP-C5F stuff as well. I have not had a problem with the those. I double checked the pins and they are to small to fit on...
Quote: Originally Posted by KurtBJC Ach! That's what I get for not reading closely....yes, of course one should get a 75 ohm resistance reading on those terminators. That makes two of us. Thanks guys.
thanks Alfonso...I was wondering...I was under the impression that the RCA ends were also "75 ohm"...shouldn't I get a 75 ohm reading on those ends as well? or is it just the F type?
I'm following the http://www.bus.ucf.edu/cwhite/theater/DIYCable.htm recipe for buidling cables. I've purchased the exact tools listed on the site including the Canare die and Parts Express crimp frame # 360-680 . I followed the...
thanks Bob... I'm a tad confused...wouldn't the sub amps act the same as the outlaw amp? There are two individual amps that drive the subs. They are separate from the sub speakers. I mihgt be mis-understanding. Is it that the...
I have a Belkin PF60 power conditioner. The PF60 has one bank with two outlets specifically designed for high draw amps. I have a Outlaw Audio 7125 that will go to one of the outlets. I also have two NHT 250watt sub amps that I also...
thanks guys...I'm ready to start
I've searched this forum and came up empty on what I'm looking for. I purchased a used set of tools and all my materials to follow the recipe provided in http://www.bus.ucf.edu/cwhite/theater/DIYCable.htm to make DIY cables. My...
I was looking at an old buddy of mine's wife's website and came across this blog and found it entertaining....thought you all would enjoy it as well. A clearly non-enthusiasts view point. Here is an exerpt... Back to the Future or...
New Posts  All Forums: