Posts by Jonathan M

It also helps if the actual frames are identical, which none of the above are. No comparison to be made otherwise. The only comparison is to grab the still frame direct off the DVD using one of the many DVD rippers available, and...

Actually, seeing as the DVD picture size of 720x480 (for NTSC) is actually not 4:3 anyway (The 4:3 frame is 704x480), it is possible to put 1.3636:1 aspect ratio on a DVD simply by using all the frame (720/480*10/11 = 1.3636...). ...

Just some points to consider: Most receivers actually use 12dB/octave Butterworth highpass filters. It's the lowpass filter to the sub that is usually 24dB/octave Linkwitz-Riley. This conforms with the THX spec. It's designed to...

An amplifier is simply something that takes a given voltage, and amplifies it by some set factor. This is all fine and dandy until you actually hook a speaker up to your amplifier in order to get sound out. The speaker represents...

Hey Chris, Sorry to hear of your problem. What version T752 do you have? (try holding pressing the AUDIO and VIDEO buttons simultaneously on the front panel.) The current model is either 1.20 or 1.22 (I can't recall which!). If...

Hey MikeNagy, I have a T752 and it does the job well for me running 5 custom built speakers all small with a decent sub (My own design). If you are only going to be using 2 channels, then I see no reason to go for the T762. As...

There seems to be quite a bit of mis-information here, so I'll try and help clear some things up. In a passive bi-amp setup, where one is using the internal (passive) crossovers on a speaker with the various sections separated (ie...

As Bill has said, the switched power outlets on the back of receivers are designed with a limited current draw in mind. This is due to a couple of things: First, it limits the amount of power that the receivers' cable needs to supply...

Hi all, After a fairly exhaustive search on the net, followed by a few emails to NAD, and to people in the know about Xantech devices, I have built a small infrared extender circuit for my system. My NAD T752 receiver is on the...

The Main-ins allow you to use the amplifiers for something else - ie if you decide to go for external amplification for some of the channels in the future, you have the opportunity to use the amplifier units (Front 3 on the T752, all 6...