Posts by David Giesbrecht

When I use any PCM source there is alway's plenty of bass but when I'm listening to DTS or DD tracks on any music DVD I've tried so far the bass level is alway's very weak. My receiver is very weird I know that when it receives a stereo...

It seems to be a consistant problem with all music discs, my receiver has the option for (-10db,0db, or off) for the LFE attenuation. I always set it to 0 accept when listening to PCM then I alway's turn it off.

anybody

It seems like whenever I am watching a music related DVD (rock in rio etc..) I have to turn my Subs up 10 db. Is this normal? My receiver is a Marantz SR4200.

I don't know if your amp has it or not but on my Marantz there is an LFE attenuater, and if it is set to off or -10 5.1 mixes will lack bass. On this DVD I found that the 5.1 mix had maybe more bass than the stereo PCM. PS: the best...

What always amazes me is the smoothness of his double stroke roll, man I wish I could play like that.

The first time I tried this little trick it messed up my DVD player and it wouldn't let me stop the disc I was really dissapointed it wasn't anomorphic I will be getting the anomorphic one next spring then it will be all better It's a...

I did notice that the Scan Speak starts to roll off under 2khz where as the Focal continues to be flat to 1khz. Is that why the Focal requires more attenuation? If I used a fourth order network @ 1750 hz would that provide enough...

These are the specs from PE Scan speak 9500 FS 550 hz Xmax +/- 0.4mm Focal TC120TD5 FS 812 hz Xmax +/- 0.5mm The Fs on the focal is a little higher than the Scan Speak but still over 1 octave lower than an XO @ 1750 hz....

Quote: When the feedback is "don't do that because........", you reply with "I don't care, it's just for experimental purposes". I do care what the feedback is the problem that I am having with the feedback is...