New Posts  All Forums:

Posts by Dave Bennett

well i got my VGA cable the other night and hooked up the computer to the LCD TV. I'm less than impressed. I can't seem to get it so that it's not scaling it and it also seems that my couch is a bit too far away for comfortable reading...
thanks Chad, that looks like a great option as well!
Thanks, yeah the Home Page Up/Down layout isn't a big deal. As for range, I'm anticipating I'll mostly be using it on the couch only a few feet from the receiver so I think that should work out fine. I found it cheap on Ebay so I put a...
Thanks for the suggestions, I'm looking for something a bit more affordable. I've found the BTC 9019. It's a wireless keyboard with a small thumbstick mouse and it uses RF. Looks like it can be had for around $50. I think I may give...
Hi, My basement PC is currently connected to an older CRT monitor and I plan on connecting it to my 37" LCD TV instead. Once I do that however, I'll need to use some type of wireless keyboard and mouse setup. Ideally, I'd like to find...
well after doing some digging i found a post describing how to get into the convergence menu. After fiddling around, I managed to rest the convergence to the factory settings. The screen position and some basic geometry settings are...
ok, so prison break is on and in 1080i the problem is not as bad and the picture was shifted down alot. I went into the service menu and changed around some settings for 1080i mode and it's looking almost back to normal in 1080i both...
Quote: Originally Posted by David Norman The other thing to look for if you don't know what the initial settings were on what you changed in the service menu --- many Samsings (and other sets) have a reset option in the...
Quote: Originally Posted by DougR Did you try unplugging the set for awhile and see if it would Reset itself to the Original setting? No, I did not. I'll give that a shot. Anyone else have any ideas? From what I...
I have a roughly two year old 42" Samsung CRT RPTV. It seems to be having problems with convergence and geometry as of yesterday morning (see pictures below). The only thing I can think of that may have made this happen was I was...
New Posts  All Forums: