Posts by dverity

Ok so I have figured out that it has something to do with using the internet radio system. I use the Pandora on the machine and when I do it locks out the remote control through the network system until you turn it off manually. Cycle...

The Harmony one is just a IR controller. Unless the outlet adapter can receive IR they are not really compatible. If the adapter can be switched to IR then you can get and IR repeater that so that you don't have leave the...

TV/VCR are though for universal remote programming. My experience is that you will have better luck programming the remote to work a VCR than a TV. The power will usually work and changing channels (not that you need that with box),...

Cheapest would be to hook up the computer itself to the system. For now get to input then use mouse and keyboard to control. Always a way to hook it up to a system just might need some adapters, but just depends on the...

From all the tests that you ran, you have eliminated a lot of possibilities. You have effectively somewhat eliminated the cable, the TV, and the receiver. To me it seems you have lost some auto configuring of resolution or some other...

I too am an installer and big fan of the Control4 platform. I would agree with the other posts that you need to make sure you have good communication with the product, it will work through any decent router that you probably already...

I have just recently put in a Onkyo TX-NR1007. I have used a Control4 system for quite a while to run my systems. With this receiver I thought it would be nice to control it through the network. It works for about 2 or 3 days then...

My thoughts as I read your post were taken to resolution as you touched on at the end.  With the power outage there certainly could have been damage done, but could also be just a settings thing too. Depending on the hit and how...