Home Theater Forum  ›  Forums  ›  Hi-Definition  ›  HT Hardware - High Definition  ›  High Def SAT Question
Forum Nav More Forums | All New Posts | New Thread

High Def SAT Question

#1
Rating: 0
10/24/09 at 9:26am
  • Joined: February 2000
  • Post Count: 111
 I have coaxial cable run throughout my house. I currently use an antenna to get HD(digital) signal through the coax in my house to my tv. Do any of the Dish Or Directv receivers have the capablity to output a HD digital signal through the coax outputs on the back of the receiver? I want to use the existing coax in my house to get a digital signal from the sat box to a tv in another room. Or is there a converter box that could take a HDMI input signal and convert it to a Digital RF output signal on say channel 69 so the tuner in my HDTV could then decode it like it does now with my antenna setup? Running a long HDMI cable from the sat box to the remote tv is not an option.

Thanks,

Marv
Export to Wiki
#2
Rating: 0
10/24/09 at 9:54pm
  • Joined: June 1999
  • Location: Central Arkansas
  • Post Count: 2,540
Dish network receivers cannot output HD via a coax output. I don't know about DTV but I assume they are the same. As far as I know, there are no HDMI to coax converters.
My Collection
Export to Wiki
#3
Rating: 0
10/24/09 at 10:50pm
  • Joined: February 2000
  • Post Count: 111
Thanks for the reply. I found this:

http://www.zeevee.com/connected-home/zvbox150#features

It will not take HDMI input but it will take component video and TOS or Coax digital audio and send it over a single coax on whatever
channel you set and at 720P. But at $1K forget it.

I was hoping for something like this:

http://www.radioshack.com/product/index.jsp?productId=2103095

But for digital RF. HDTV must be to new yet.
Export to Wiki
#4
Rating: 0
10/28/09 at 9:35pm
  • Joined: September 2009
  • Post Count: 11
There are very few things that modulate HD onto Coax at this point - the ZeeVee device is the cheapest currently available. We (disclaimer as I'm mentioning the company I work for) Bocs, will be releasing a much cheaper version next year. Currently most people use clearQAM which may or may not be on all your TVs. Next generation is in-home ATSC.
If you can live with DVD quality, you can, in fact use an NTSC modulator although I'd strongly recommend staying away from the $30 Radio shack kinds of things.
There are plenty of good quality modulators out there (like Channel Plus) on the web. Ours (bocsco.com/virtualbocs.php) is a good choice if you also need wireless remote control bundled.
If you really need full HD, then a component video matrix like from avatrix is the normal way to go.

David Feller
Export to Wiki
#5
Rating: 0
11/1/09 at 10:12am
  • Joined: September 2009
  • Post Count: 11
By the way, I've tried the ZeeVee product and it is very good...
Export to Wiki
Forum Nav More Forums | All New Posts | New Thread