I have a very simple setup...
Comcast DVR box >>HDMI>> Pioneer VSX-917 >> HDMI>>Projector
Recently after about 90 min my projector goes BLANK (black).
Audio continues just fine... Projector is still on, and does not give me a "no signal" error...just goes blank...
Power cycling the receiver brings back the video...as does letting it sit and cool for a while.
The unit has plenty of space around it... I made sure of that...so I am not convinced it is a heat issue
I occasionally get a YcBM (?) or other HDMI error, but I suspect that is the comcast box... a few seconds later everything syncs up and is happy...
Any ideas as to why my receiver is going blank?
I went through the Concast reciever Advanced setup... everything looks OK...
Comcast DVR box >>HDMI>> Pioneer VSX-917 >> HDMI>>Projector
Recently after about 90 min my projector goes BLANK (black).
Audio continues just fine... Projector is still on, and does not give me a "no signal" error...just goes blank...
Power cycling the receiver brings back the video...as does letting it sit and cool for a while.
The unit has plenty of space around it... I made sure of that...so I am not convinced it is a heat issue
I occasionally get a YcBM (?) or other HDMI error, but I suspect that is the comcast box... a few seconds later everything syncs up and is happy...
Any ideas as to why my receiver is going blank?
I went through the Concast reciever Advanced setup... everything looks OK...
