I recently purchased a Dish VPR 722 HD DVR..when i tried hooking it up to my Infocus SP 4805 with the hdmi out to the DVI in on the projector, Im getting a double image on the screen? Its like from left to right on the sreen is part of the picture, then the right hand one third of the screen has the left hand part of the picture on it? I have used this same cable with my upconvert dvd player and it worked perfect, and when i hook up component video out of the dvr into the 4805 the picture is fine. I called dish to see if there were any settings in the dvr that would cure the problem and they had no answers and the tech i talked to had never seen the problem before..I tried settings in the 4805 menu also with no luck...has anyone else had this problem, and if so any help on fixing it would be greatly appreciated..thanks
5/4/09 at 12:38pm
- Joined: May 2009
- Post Count: 3
