Home Theater Forum  ›  Forums  ›  Hi-Definition  ›  HT Hardware - High Definition  ›  Best way to connect my Sanyo projector to blu ray?

Best way to connect my Sanyo projector to blu ray?

#1
Rating: 0
I have a Sanyo HD projector capable of 108oi but it does not have a HDMI. Is there a receiver that I can use to connect all my components to that will convert hdmi to componet?

My projector is a pvl60ht from Sanyo.
It has component, RGB S video, composit and Y,Pb/Cb,Pr/Cr (BNC type).
I would like to be able to hook my High def stuff (360, blu ray, Directv) to the receiver and have it all connected to the projector.

Thanks
Jim


DVD Collection:
http://www.dvdprofiler.com/mycollection.asp?alias=geniusjim
Export to Wiki
#2
Rating: 0

Re: Best way to connect my Sanyo projector to blu ray?

The answer to question #1 is: I don't think so.
Do you have a receiver with 3 component inputs? If so, you would hook up your 3 sources listed to "component in" on receiver. Then you would run one component cable from "component out" on receiver to projector. Then you would run audio cables from each component to receiver.
Export to Wiki
#3
Rating: 0

Re: Best way to connect my Sanyo projector to blu ray?

i was afraid there was no way to convert HDMI to another high def type.
thanks

Jim


DVD Collection:
http://www.dvdprofiler.com/mycollection.asp?alias=geniusjim
Export to Wiki
#4
Rating: 0

Re: Best way to connect my Sanyo projector to blu ray?

I am not sure if you are aware but because you are using the componant cable as opposed to HDMI you will not be able to take your SD dvds and have the Blu Ray player upscale them to 1080i, they will be playing at 480i. You will only be able to achieve 1080i resolution when you are playing Blu Ray discs on your Blu Ray.
Export to Wiki