- Joined: July 2005
- Post Count: 1,294
Re: Need help setting up my yamaha RX-V663BL receiver!!!
Does your receiver have an "HDMI Monitor Out" setting? You'll have to switch this to either "yes" or "on" to get picture. Just to cover some basics, You have the PS3 connected to the receiver with an HDMI cable into one of the "HDMI IN" terminals on the back of the receiver and then a second HDMI cable going from the "HDMI OUT" terminal on the back of the receiver to the "HDMI IN" terminal on the back of the tv set, correct? You also need to make sure the "Video Input" setting on the tv set is on the right video setting. The same goes for the receiver, be sure you have selected the correct output setting to correspond with which jack you plugged the selected players HDMI cable into. You may also have to assign an HDMI input on the receiver. This has to be done in the receivers set-up menu. An example would be, setting the HDMI 1 to the "SAT/Cable" button and the HDMI 2 to the "DVD" button. Since you dont have a remote you will have to set all this from the front panel display on the receiver.
" I think it's time we go to plan B". "What's plan B?" "That's the one where we don't do something stupid".
