Home Theater Forum  ›  Forums  ›  Home Theater Hardware  ›  Display Devices (TVs/Projectors)  ›  Pioneer PRO 1130, Problem, No Picture
Forum Nav More Forums | All New Posts | New Thread

Pioneer PRO 1130, Problem, No Picture

#1
Rating: 0
8/4/08 at 6:27am
  • Joined: August 2008
  • Post Count: 2
I disconnected my plasma from the media box to reconfigure my set up and after reconnecting, I get no picture, menu, or any display on the plasma. the remote turns both the plasma and the media box on and off and the plasma will flash blue and red boxes but I cannot get anything to show. any suggestions?
Export to Wiki
#2
Rating: 0
8/4/08 at 5:04pm
  • Joined: November 1999
  • Location: New England
  • Post Count: 5,163

Re: Pioneer PRO 1130, Problem, No Picture

recheck your connections.
The Sonodome - circa 2001
The Newest Sonotube - circa 2001
Gregg's DVDs updated...sometimes
Lion Audio Video Consultants usually current
Export to Wiki
#3
Rating: 0
8/5/08 at 3:15pm
  • Joined: October 2007
  • Location: Middletown N.Y.
  • Post Count: 179

Re: Pioneer PRO 1130, Problem, No Picture

I have the same Plasma, there has to be something wrong with your connections.
Export to Wiki
#4
Rating: 0
8/6/08 at 1:59pm
  • Joined: October 2007
  • Location: Middletown N.Y.
  • Post Count: 179

Re: Pioneer PRO 1130, Problem, No Picture

Maybe unplug the unit for about one hour, unplug everthing cable box etc. then plug back in. Every six months or so I have to unplug everthing because I start getting pops trough the speakers on the tv, that's because the capacitors are over charged, after that it's OK..Must be the capacitors on the cablebox..
Export to Wiki
Forum Nav More Forums | All New Posts | New Thread