Home Theater Forum  ›  Forums  ›  Home Theater  ›  Members Theaters and HT Projects  ›  need recommend on high output 15" sub for around 3 ft3?
Forum Nav More Forums | All New Posts | New Thread

need recommend on high output 15" sub for around 3 ft3?

#1
Rating: 0
5/16/08 at 9:22pm
  • Joined: January 2008
  • Post Count: 15
I am searching for a sub driver for home theater only. Preferrably high excursion and will work in around a 3-3.5 ft3 enclosure.

thank you
Export to Wiki
#2
Rating: 0
5/16/08 at 9:47pm
  • Joined: August 2000
  • Location: Southaven, MS
  • Post Count: 4,540

Re: need recommend on high output 15" sub for around 3 ft3?

I use a TC-3000/Audiopulse Axis in a 3cf, sealed box powered by a Behringer EP-2500. With a Behringer Feedback Destroyer as an EQ to lower the inductance hump at 55hz and boost the low end. If that is outside of your budget, then there are dozens of other subs. What is your budget because we can go from the Dayton Quatro to the Audiopulse LMS?

-Robert
Export to Wiki
#3
Rating: 0
5/16/08 at 10:03pm
  • Joined: February 2007
  • Location: west coast of florida
  • Post Count: 897

Re: need recommend on high output 15" sub for around 3 ft3?

If you want to go with Audiopulse, do it quick. They went out of business recently and the drivers at Parts Express are just left overs from the last batch.

"Bobby is and idiot"
Export to Wiki
#4
Rating: 0
5/17/08 at 6:53am
  • Joined: January 2008
  • Post Count: 15

Re: need recommend on high output 15" sub for around 3 ft3?

thinking around 300-400.00 for the driver.
Export to Wiki
#5
Rating: 0
5/17/08 at 8:36am
  • Joined: February 2007
  • Location: west coast of florida
  • Post Count: 897

Re: need recommend on high output 15" sub for around 3 ft3?

Well, that rules out the Audiopulse drivers, the Dayton Titanic drivers are $220. The cheapest 15" Audiopulse driver is the Audiopulse REVO 15" which is $510.

"Bobby is and idiot"
Export to Wiki
#6
Rating: 0
5/17/08 at 11:33am
  • Joined: August 2000
  • Location: Southaven, MS
  • Post Count: 4,540

Re: need recommend on high output 15" sub for around 3 ft3?

The Soundsplinter RL-p 15 dual 2 ohm. It has a low Qts of .333. I would want to the Vas to be closer to 140L like the dual 4 ohm version but 163L is still in the acceptable range. It will handle gobs of power so you can easily push it with a pro amp.

-Robert
Export to Wiki
#7
Rating: 0
5/18/08 at 6:49am
  • Joined: January 2008
  • Post Count: 15

Re: need recommend on high output 15" sub for around 3 ft3?

what about a sealed css sdx15?
Export to Wiki
Forum Nav More Forums | All New Posts | New Thread