- Joined: January 2007
- Location: Michigan
- Post Count: 42
I have been reviewing receivers for the past several weeks, and believe I have my selection finalized on the Onkyo SR875. Does anyone have experience with this receiver?
I will be running the unit in a dedicated 16x20 HT with a full set of Acoustic Research Hi-Res series (AR1 main, AR2C center, AR15 surround, AR17 surround).
Its in my price range at $1k-$2k, and has sufficient inputs and outputs to meet my needs. Initially, I will be upconverting multiple sources (Popcorn Hour, Vista MCE, PS3, and SD-DVD) and displaying them on a 60" Philips 1080p DLP until I have made a projector decision.
I am not terribly concerned with heat, as I will be installing it in a climate controlled cabinet with several networking and digital storage components.
Does anyone have any comparable receivers that I can add to my list to evaluate and review?
-
Dave Moritz
- Dave Moritz
-
- offline
- Joined: July 2001
- Location: Whittier, California
- Post Count: 2,598
Re: Onkyo TX-SR875, good unit or should I keep reviewing?
You might want to consider a Onkyo TX-NR905 for a little more, MSRP is $2,099. Most of the specifications are the same but the 905 also has a toraoidal transformer plus 2 separate transformers for Audio & Video processing and the 875 does not. The 905 also features ethernet and HD Radio while the 875 does not. The 875 delivers 65A of current and the 905 delivers 70A of current. Otherwise they both rated 140 watts X 7 at 8 ohms and Amplifier Frequency Response 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode).
Onkyo 875
Power (8ohms 20-20kHz 0.05%) /Ch 140W
Power (8ohms 1kHz 0.7%) /Ch 160W
Dynamic Power 320 W (3 ohms, 1 ch)
270 W (4 ohms, 1 ch)
160 W (8 ohms, 1 ch)
High Instantaneous Current Capability 65A
Frequency Response 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode)
S/N Ratio (LINE IN) 110dB
DACs S/N Ratio 126dB
DOLBY Decoder DD Plus, TrueHD
DTS Decoder DTS-HD Master Audio
Audyssey MultEQ XT
Multi-Band Speaker EQ 7 Band
Component Video / Bandwidth 3 / 2 / 100MHz
HDMI I/O 4 / 1
HDMI Version V1.3 Repeater
Power Consumption 870W
Weight 50.9 lbs. (23.1 kg)
Warranty 2 YEARS
Onkyo 905
Power (8ohms 20-20kHz 0.05%) /Ch 140W
Power (8ohms 1kHz 0.7%) /Ch 170W
Dynamic Power 400 W (3 ohms, 1 ch)
300 W (4 ohms, 1 ch)
180 W (8 ohms, 1 ch)
High Instantaneous Current Capability 70A
Frequency Response 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode)
S/N Ratio (LINE IN) 110dB
DACs S/N Ratio 126dB
DOLBY Decoder DD Plus, TrueHD
DTS Decoder DTS-HD Master Audio
Audyssey MultEQ XT
Multi-Band Speaker EQ 7 Band
Component Video / Bandwidth 3 / 2 / 100MHz
HDMI I/O 4 / 2
HDMI Version V1.3 Repeater
Power Consumption 1000W
Weight 54 lbs. (24.5 kg)
Warranty 2 YEARS
If you buy a factory refurbished 905 you can get it alot cheaper if you want to go that route? Under $1,400 at accessories4less
Hope this helps?
1080p High Definition SupporterLossless Audio Supporter Current Library: 221 DVD's / 70 HD-DVD's / 181 Blu-ray's (251 HD Titles)
- Joined: January 2007
- Location: Michigan
- Post Count: 42
Re: Onkyo TX-SR875, good unit or should I keep reviewing?
Thanks for the great feedback.. I am going to think about going to the 905. I have a little time before I need to get it anyways, so I will do a little research. The HD-Radio is a welcome feature, even though Im not sure that there is many stations in my area broadcasting it.
-
Dave Moritz
- Dave Moritz
-
- offline
- Joined: July 2001
- Location: Whittier, California
- Post Count: 2,598
Re: Onkyo TX-SR875, good unit or should I keep reviewing?
Hey there thrca,
Here is a link to HD radio stations in the state of Michigan.
HD Radio Station List
Let us know what receiver you end up with and how it works out for you.
1080p High Definition SupporterLossless Audio Supporter Current Library: 221 DVD's / 70 HD-DVD's / 181 Blu-ray's (251 HD Titles)
- Joined: January 2007
- Location: Michigan
- Post Count: 42
Re: Onkyo TX-SR875, good unit or should I keep reviewing?
Anyone using HD-Radio that can comment on the range? I understand how the technology works, so I am curious if the range is about the same as the analog, better, or worse.. There is a handful of HD-R stations in Grand Rapids, which I can usually pick up their analog broadcasts. I am pretty much at the edge of their analog coverage area.
-
Dave Moritz
- Dave Moritz
-
- offline
- Joined: July 2001
- Location: Whittier, California
- Post Count: 2,598
Re: Onkyo TX-SR875, good unit or should I keep reviewing?
I have no idea but if I pick up the Onkyo TX-NR905 I will find out. I hope they start offering more HD radio here in Phoenix.
# of HD stations in thoose markets.
Los Angeles: 12
Phoenix: 8
Las Vegas: 8
Dallas/Ft Worth: 12
Denver/Boulder: 11
Salt Lake City/Ogden: 11
Portland: 12
Grand Rapids: 8
I would love to know what the range of the HD radio signals are as well. Hopefully around the end of the year I will be able to check out HD radio. It is not something I would listen to alot but it would be nice to have.
1080p High Definition SupporterLossless Audio Supporter Current Library: 221 DVD's / 70 HD-DVD's / 181 Blu-ray's (251 HD Titles)
- Joined: January 2007
- Location: Michigan
- Post Count: 42
Re: Onkyo TX-SR875, good unit or should I keep reviewing?
The one thing I DO know about the format is that its like comparing analog TV to digital TV.. You will have a near perfect signal until the interference is enough to add enough errors so as to not be able to process it at all. In other words, you wont get fuzzy sound for a few miles, then really fuzzy, then nothing but fuzz, it either will be fine or not at all.
But this doesnt really answer my curiosity where the signal breakup point is, whether its at the "analog fuzzy", "analog really fuzzy" or beyond area.
Plagerized from CrutchfieldQ: Is the coverage area of my station's HD Radio signal identical to that of their current signal?
A: Although the coverage area will be similar, there can be areas where only the analog signal can be heard, and conversely, areas where only the HD Radio digital signal can be tuned in. Because terrain obstacles affect analog and digital signals in slightly different ways, there's no sure-fire way to predict reception, especially on the outskirts of a station's coverage area.
|
