Home Theater Forum  ›  Forums  ›  Home Theater Hardware  ›  Receivers/Separates/Amps  ›  Help with Denon AVR-2805
Forum Nav More Forums | All New Posts | New Thread

Help with Denon AVR-2805

#1
Rating: 0
4/30/08 at 6:15am
  • Joined: April 2008
  • Post Count: 2
So I finally bought some speakers this weekend and have been trying to hook them up to my receiver for two days now with no success. My receiver is a Denon AVR-2805 and the speakers are Klipsch Quintet SLs.

Here is what I have tried:

Hooked a speaker into the center channel as well as front R and L channels on the RX and tried to get the test tone to output. No luck. I can hear faint static from the speakers when they are connected but can't get any sound to come out of them no matter what the input source on the receiver is (DVD, PS2, Tuner, etc)

Yes, the receiver is plugged in
No, the volume on the receiver isn't turned all the way down
No, I haven't had speakers hooked up to the receiver in the past
Yes, I am sure the speakers work, I hooked them up to an old stereo
No, the speaker wire isn't the problem

At this point I am out of ideas. I've consulted the manual and as far as I can tell I have done everything in there that I need to to set the speakers up. If there is anyone out there who's got the same receiver and can give me some pointers as to what the hell I am doing wrong or if there is some setting on the receiver that needs to be tripped to get sound to output to the speakers, I would greatly appreciate it.
Export to Wiki
#2
Rating: 0
4/30/08 at 9:29am
  • Joined: May 2003
  • Location: Eastern NC
  • Post Count: 1,760

Re: Help with Denon AVR-2805

Make sure your A/B speaker switch is set to "A", if you connected the speakers to the "A" set of connections, on back of receiver.
Also, double check to make sure the "Mute" button hasn't been pushed by accident. Two things easily overlooked............
Samsung HL61A750 (LED DLP)            Onkyo TX-SR805
Oppo BDP-83 Blu ray                                  Polk Audio LSi9
Polk Audio LSiC                                  Sony SS-MB100H
JBL PSW1200 (Sub)                        ...
Export to Wiki
#3
Rating: 0
4/30/08 at 5:18pm
  • Joined: April 2008
  • Post Count: 2

Re: Help with Denon AVR-2805

Ya, did that and no mute
Export to Wiki
#4
Rating: 0
5/1/08 at 11:05am
  • Joined: August 2003
  • Post Count: 156

Re: Help with Denon AVR-2805

On zone 2 instead of zone 1?
Export to Wiki
#5
Rating: 0
5/4/08 at 11:18am
  • Joined: December 2004
  • Post Count: 15

Re: Help with Denon AVR-2805

Serds, I have a 2805 (and love it). I'm guessing you have the speakers set up fine. With the remote:
  • First, make sure the power is off.
  • Second, on manual page 58, step 2, on the remote, make sure you push the "[AMP] CD/MD" button.
  • Next, to power up the rx, on the remote, near the top right, push the "ON" button under "Zone 1 [MAIN]"
For some reason that AMP button needs to be selected first.

Still, nothing?
  • Then on that page 58 do step 5 by toggling through the front speakers to make sure those are correct.
  • Still nothing? Then on page 59, step 2 make sure you toggle through "mode" and have it set at "auto."

Those are the top three things that have messed me up and caused confusion when I first got the receiver.

Try that?

Jim
Export to Wiki
Forum Nav More Forums | All New Posts | New Thread