Home Theater Forum  ›  Forums  ›  Other Diversions  ›  Mobile Phones / Entertainment  ›  4 Channel Amp
Forum Nav More Forums | All New Posts | New Thread

4 Channel Amp

#1
Rating: 0
1/3/04 at 3:24pm
  • Joined: December 2000
  • Post Count: 192
I am looking for a reasonably priced(around $200 or less) amp to drive two 6.5" Kenwood Excelon in the front and two Kenwood 6 X 8's in the back. I have a twelve inch sub(Old SVS standard driver) already, so the speakers will only be seeing from about 80hz on up. I am just trying to improve some on the sound quality over the head unit that is pushing them now(Sony CDX MP80, 4 X 52watts).

Does anyone know how good Crossfire or db amps are? I have been out of the game for a while and they are both new to me.

Thanks!
Export to Wiki
#2
Rating: 0
1/3/04 at 5:42pm
  • Joined: November 2002
  • Post Count: 46
I have a Crossfire TEK 35.2 2-channel amp, I'm very happy with it. Crossfire makes some very nice amps and there underated as well. You should check them out if you can, I believe the TEK series is out of product now.

John
Export to Wiki
#3
Rating: 0
1/9/04 at 5:43pm
  • Joined: December 2000
  • Post Count: 192
Thanks John! I ended up going with the Crossfire VR142. It is 35watts X 2. I decided to just let the rear speakers remain powered by the head unit since I really fade most of them out anyway. It really sounds good. I was not sure of my choice on the Kenwood Exelon speakers with the head unit powering them but they sound much better with the amp. Headroom means so much weather it is at home or in the car. Thanks again!
Export to Wiki
#4
Rating: 0
1/10/04 at 8:52am
  • Joined: November 2002
  • Post Count: 46
Way to go Robert! I'm sure you will enjoy the Crossfire amp.
Export to Wiki
#5
Rating: 0
1/19/04 at 7:33pm
  • Joined: March 2002
  • Post Count: 322
Export to Wiki
#6
Rating: 0
3/16/09 at 6:13pm
  • Joined: March 2009
  • Location: San Diego,CA
  • Post Count: 2

Re: 4 Channel Amp

I am also Looking for A amplifier 4 channel for My Sony Home Theater 6.1 its a 840 watt have Poke audio Big speakers in the front . I had a ply Pro 3000watts but it made Noise at low Vol. So i sent it back Boy that had power..please let me know thanks
Export to Wiki
Forum Nav More Forums | All New Posts | New Thread