X-over for SVS and Paradigm Moniter 7's?

Discussion in 'Speakers' started by Jonathan_E, Mar 6, 2004.

  1. Jonathan_E

    Jonathan_E Agent

    Joined:
    Jun 25, 2003
    Messages:
    43
    Likes Received:
    0
    Hello,

    My new SVS 20-39 pci will be arriving on Monday and I was curious if anyone had any suggestions for what I should set the cross-over on my Denon AVR 3803 at. I have Paradigm Monitor 7's for the mains, a CC-370 for the center, and some cheap sonys for surround that will be replaced with mini monitors when the funds are available.

    If I remember correctly, the 3803 allows you to adjust the cross-over by 20 hertz intervals between 40 to 120 hertz. So, I was just curious if there was anyone out there with a similar set up that might have some recommendations.

    Thanks,
    Jonathan
     
  2. Mike_Skeway

    Mike_Skeway Second Unit

    Joined:
    Jan 13, 2004
    Messages:
    265
    Likes Received:
    0
    If you can or want to do a different setting for each. You could set the Monitor 7s at 70Hz, the CC-370 at 120Hz, and the Mini Monitors to 80Hz.

    Or just set them all to 80Hz. [​IMG]

    Also, disable the crossover on the sub or turn it to the highest setting.
     

Share This Page