Toshiba 56 Point Convergence Clarification

Discussion in 'Displays' started by Cameron Yee, May 1, 2003.

  1. Cameron Yee

    Cameron Yee Executive Producer
    Reviewer

    Joined:
    May 9, 2002
    Messages:
    11,572
    Likes Received:
    584
    Location:
    Since 2006
    Real Name:
    Cameron Yee
    I've started looking at the procedure for doing service (56 pt) convergence and have peeked at the grid. If I understand the instructions correctly pushing 100, 0 and ENT turn off the red, green and blue CRTs, respectively. However, when I push ENT nothing seems to happen and pushing the others results in either a magenta, cyan or white grid. None of the instructions I've found provide information about what I should be seeing so any clarification would be appreciated.
     
  2. Jeff Gatie

    Jeff Gatie Lead Actor

    Joined:
    Aug 19, 2002
    Messages:
    6,531
    Likes Received:
    15
    Pushing "ENT" is not the right button for the blue CRT. I forget which one it is.

    Checking Keohi . . .

    http://www.keohi.com/keohihdtv/brand...manualtip.html

    Yes, now I remember that the later (xxH80) models used the "Ch Rtn" button instead of "ENT", try that instead.
     
  3. Michael TLV

    Michael TLV THX Video Instructor/Calibrator

    Joined:
    Mar 16, 2000
    Messages:
    2,909
    Likes Received:
    1
    Location:
    Calgary, Alberta
    Real Name:
    Michael Chen
    Greetings

    ch rtn ...

    regards
     

Share This Page