Test

Discussion in 'Testing' started by Wayne A. Pflughaupt, Dec 21, 2004.

  1. Wayne A. Pflughaupt

    Joined:
    Aug 5, 1999
    Messages:
    6,044
    Likes Received:
    17
    Location:
    Katy, TX
    Real Name:
    Wayne
    Test
    Test
    Test
    Test
    Test
     
  2. Wayne A. Pflughaupt

    Joined:
    Aug 5, 1999
    Messages:
    6,044
    Likes Received:
    17
    Location:
    Katy, TX
    Real Name:
    Wayne

    Test

    Test
    Test
    Test
    Test
     
  3. Wayne A. Pflughaupt

    Joined:
    Aug 5, 1999
    Messages:
    6,044
    Likes Received:
    17
    Location:
    Katy, TX
    Real Name:
    Wayne

    OVERVIEW


    OVERVIEW

    Infinity PS-12


    Description/Published Specs
    The PS-12 is a 12-inch rear ported design. The manual gives frequency response as 25-150Hz +/-3dB, and amplifier output as 300 watts RMS.

    The variable crossover sweeps between 50-150Hz, with excellent 24dB/octave slopes. A “Normal/LFE” switch on the rear panel fully disables the crossover in the “LFE” position.

    The back panel has the standard left and right RCA line inputs, but most likely they are summed internally, since back-panel labeling instructs that either the left or right jack can be used for LFE from a Dolby Digital receiver.
     
  4. Dave Poehlman

    Dave Poehlman Producer

    Joined:
    Mar 8, 2000
    Messages:
    3,813
    Likes Received:
    0
    Calabi-yau
    Calabi-yau
    Calabi-yau
    Calabi-yau
     
  5. Wayne A. Pflughaupt

    Joined:
    Aug 5, 1999
    Messages:
    6,044
    Likes Received:
    17
    Location:
    Katy, TX
    Real Name:
    Wayne
    When the review is posted, look to see how the word “décor” is rendered – SVS, “initial impressions,” paragraph
     

Share This Page