Test Tone CD burnt. Now what?

Discussion in 'AV Receivers' started by wooly, Mar 6, 2011.

  1. wooly

    wooly Auditioning

    Joined:
    Mar 5, 2011
    Messages:
    7
    Likes Received:
    0
    Excuse me if this sounds like I don't know what I'm doing because I don't.


    I have the radio shack SPL meter. I am able to adjust each speaker according to the test tones on the amp (Harman Kardon) but now I'm getting into it a little farther but that's where I need some help.


    I burn't a test tone CD with all the frequencies from 10hz up to 300hz. along with a pink noise generator. I know that somehow you use this to fine tune your system but I having a hard time understanding it because I'm not sure what I'm doing, What exactly is the purpose of a test tone cd and how does one achieve the end result so that my system is at it's best performance?


    Could someone give me some instructions as to what I should be doing in plain, not to tech language or direct me to a web site? This is new to me. I'm from the day when you had On, Off, tone and volume and that was it.


    Thanks
     

Share This Page