Sonicaps and wiring polarity question...

Discussion in 'Home Theater Projects' started by JamesThompson, Jan 13, 2004.

  1. JamesThompson

    Joined:
    Nov 4, 2002
    Messages:
    44
    Likes Received:
    0
    I'm full swing into building my A/V-3S center channel speaker and will be assembling the crossover tonight. While looking at the Sonicap capacitors that came with the kit, I can not tell the polarity of either end. Doesn't capacitors have polar ends (+ / -)? If so, what are the identifying marks on the sonicaps? If not, just call me a dufus. [​IMG]
     
  2. Brian Bunge

    Brian Bunge Producer

    Joined:
    Sep 11, 2000
    Messages:
    3,716
    Likes Received:
    0
    Some caps have to be wired with a specific polarity but not all of them. The Sonicaps can be wired either way so don't worry about it.

    If you drive up to Cocoa Beach and buy me a new Ron Jon's shirt I won't call you a dufus! [​IMG]
     
  3. JamesThompson

    Joined:
    Nov 4, 2002
    Messages:
    44
    Likes Received:
    0
    Thanks Brian. I was hoping that was the answer. [​IMG]

    Too cold to go get a shirt. Dipping into the 60's through the day here lately. [​IMG]
     
  4. Brian Bunge

    Brian Bunge Producer

    Joined:
    Sep 11, 2000
    Messages:
    3,716
    Likes Received:
    0
    James,

    Better break out the parka![​IMG]
     

Share This Page