Screen "Up" with harmony 650 All Off? (1 Viewer)

[horrorfreak]

So I got a Harmony 650 for Christmas and I absolutely love it. I have everything running pretty much how I want except for one thing. I have an Elite Screen that I am able to get to go up and down, but I would love to be able to add the "Up" command to the "All Off" button. is there a way to add this function to that button?

 

[Adam Gregorich]

How does your Elite Screen go up and down? Through a hard wired switch? There are a lot of ways you can do it, but if your screen controller doesn't have IR capabilities you will probably need to add some hardware.

You can wire a 12v trigger from your PJ so the screen raises and lowers when the PJ turns on and off. This is probably easiest as it has nothing to do with the remote, but you will need a wire between the PJ and the screen. There are some other options that Elite has, but I would need to know your model of screen and how its currently controlled.

Here are your options. You need something that's either voltage or IR controlled: http://www.elitescreens.com/products/others-42936

 

[BigJim]

It sounds like he can control the screen through the remote already, but wants to add the "screen up" command to the off button. I have a different Harmony remote, and I don't know if that's possible. Here's a related question on the Harmony forums. Not sure if that's helpful.