Receiver Setup issue?

Discussion in 'Beginners, General Questions' started by michealjohn, Mar 1, 2013.

  1. michealjohn

    michealjohn Auditioning

    Jan 26, 2013
    Likes Received:
    Below is my setup: Sony 32 inch EX650 Series BRAVIA Full HD with Edge LEDKDL-32EX650 (Should supports ARC) Yamaha RX-V373 (HTR-3065) Sony Blu-Ray Player (BDP-S490) Set-top box
    1. Set-top box >> connects to HDMI 1 (IN) in Receiver 2. Sony Blu-Ray Player (BDP-S490) >> connects to HDMI 2 (IN) in Receiver 3. HDMI OUT from Receiver >> connects to TV In addition, I have the below setup if I want to watch TV without receiver. 1. Component cable connected from Set-top box to TV directly along with the Audio cable (Planning to replace it with Optical for Audio) which works perfectlty without receiver. Now the issue is whenever, I am switching on Receiver and Sony Blu-Ray player and want to listen music/movie form the blu-ray the audio is not coming from Receiver always and it is from TV speaker instead. Sometimes it is working meaning the audio comes out from Receiver. Sometimes not working and all the audio coming from TV and I need to manually change the Sound output from "TV Speaker" to "Audio System" in the TV. Any setup issue? Pls advise. Also do we need to connect BD/DVD in the first HDMI of receiver? Because I have connected in HDMI 2 (should not be an issue...I believe) Thanks.

Share This Page