Rack question

Discussion in 'Home Theater Projects' started by Marc_E, Sep 19, 2004.

  1. Marc_E

    Marc_E Supporting Actor

    Joined:
    Oct 9, 2001
    Messages:
    771
    Likes Received:
    0
    HI all,
    Redoing the house including the theater and the wall I have my rack up against is going. This leaves me with a dilemma. I was thinking of building a flex rack coffee table 48x40 with a bottom and middle shelf that would accommodate 8 components. Has anyone done this? Is there MDF sheets that would accommodate this that are 48" wide or >40" to cut down to a 48x40 piece?
    I was going to take a trip to homedepot to check but thought I would throw it out there.
    Thanks

    Marc_E
     
  2. Robt_Moore

    Robt_Moore Stunt Coordinator

    Joined:
    Feb 27, 2002
    Messages:
    66
    Likes Received:
    0
    Marc:

    MDF is sold in sheets sized 49in x 97in, and the Home Depot can cut them down to what size you need. It should be about $20 for the sheet.

    Bob
     

Share This Page