Optical vs. RCA outputs on CD Player

Discussion in 'Playback Devices' started by BrianM, May 22, 2003.

  1. BrianM

    BrianM Stunt Coordinator

    Joined:
    Mar 14, 2000
    Messages:
    85
    Likes Received:
    0
    I just bought a Sony 555ES 400 disc changer that has both an optical cable connection as well as the standard RCA connections. Is there an advantage to one over the other or should I just hook both of them up at the same time? Any help would be greatly appreciated.
     
  2. Vin

    Vin Supporting Actor

    Joined:
    Oct 23, 2000
    Messages:
    547
    Likes Received:
    0
    Using the analog cables will utilize the D/A converter in your CD player, if you use the optical cable the D/A conversion will be done in your receiver. Try both and see which one sounds better to you.

    Vin
     
  3. Philip Hamm

    Philip Hamm Lead Actor

    Joined:
    Jan 23, 1999
    Messages:
    6,888
    Likes Received:
    2
    If you are running a surround set-up, one with 5 or6 speakers and an optional subwoofer and a receiver with either or both of the "Dolby Digital" or "DTS" logos on the front, you need to use a digital connection to get the surround sound. The optical is a digital connection. The white and red L/R is not. There is another digital connection called "Coaxial" which looks like the audio connectors but is really different, you need a video cable for that.
     
  4. Scott Merryfield

    Scott Merryfield Executive Producer
    Supporter

    Joined:
    Dec 16, 1998
    Messages:
    11,690
    Likes Received:
    763
    Location:
    Michigan
    Philip,

    The title of Brian's post indicated that this was a CD player, not a DVD player. The digital optical connection's only 5.1 surround use would be for DTS 5.1 CD's.

    I'm sure you just missed that in the title. I had to re-read it myself.
     
  5. Rich Malloy

    Rich Malloy Producer

    Joined:
    Apr 9, 2000
    Messages:
    3,999
    Likes Received:
    0
    Brian, they will sound different, but which will sound better depends on a number of factors.

    My recommendation: hook it up to your receiver both ways, simultanously, such that you can use your receiver to switch back and forth between either connection. Ensure that the RCA cable connections are in the "analog bypass" mode on your receiver (you don't want to do a digital to analog conversion in your player, only to have your receiver re-digitize the signal and then convert it again to analog). Now A:B, making sure that the signals are level-matched. Which sounds better to you?
     
  6. Philip Hamm

    Philip Hamm Lead Actor

    Joined:
    Jan 23, 1999
    Messages:
    6,888
    Likes Received:
    2
     
  7. JamesHl

    JamesHl Supporting Actor

    Joined:
    May 8, 2003
    Messages:
    813
    Likes Received:
    0
    Also, if you have a billion cables or the cables that you are using are of questionable quality, you don't have to worry about interference with optical.
     
  8. Scott Merryfield

    Scott Merryfield Executive Producer
    Supporter

    Joined:
    Dec 16, 1998
    Messages:
    11,690
    Likes Received:
    763
    Location:
    Michigan
    Like others have said, try both and see which you prefer. With my old Sony entry level CD carousel player, I preferred the sound of the digital connection (using the DACs in my receiver). Once I upgraded to a newer Sony ES carousel player, I preferred the analog connection (using the DACs in the CD player).

    I did leave the digital connection in place for those DTS 5.1 CDs, though, Philip. [​IMG]
     

Share This Page