No text for "Wiring Nuvi"

Discussion in 'Beginners, General Questions' started by silverhawk, Jan 31, 2012.

  1. silverhawk

    silverhawk Auditioning

    Joined:
    Jan 31, 2012
    Messages:
    5
    Likes Received:
    0
    After installing the AV Navigator CD on my laptop computer.running Vista and Windows 8, the "Wiring Navi" section does not contain any text. Only diagrams and the radio buttons. Without text it is impossible to interactively setup my VX-1121k receiver. Isn't the "User Account Control" box supposed to appear in prior to the Wiring Nuvi section loading?. Don't believe the problem is this CD since will load correctly on a computer running XP.
     
  2. Adam Gregorich

    Owner

    Joined:
    Nov 20, 1999
    Messages:
    15,685
    Likes Received:
    676
    Location:
    The Other Washington
    Real Name:
    Adam
    Is the software designed to work with windows Vista/7/8? Do you know you are connected to the receiver? Do you connect with ethernet or USB? If USB, verify you are connected to it as it could be a USB driver issue with the newer version of Windows.
     
  3. silverhawk

    silverhawk Auditioning

    Joined:
    Jan 31, 2012
    Messages:
    5
    Likes Received:
    0
    Have not connected to the receiver yet. "Wiring Nuvi" is supposed to give you all the instructions how to wire and connect to the receiver. The first portion does not show any text, only some diagrams and empty radio buttons. After that the program will instruct you to turn on the receiver.using "Detection" I will be connecting wireless to the receiver using a Netgear WNCE 2001 Internet Adaprer on the receiver.
     
  4. Adam Gregorich

    Owner

    Joined:
    Nov 20, 1999
    Messages:
    15,685
    Likes Received:
    676
    Location:
    The Other Washington
    Real Name:
    Adam
    Have you tried running in compatibility mode? Right click on the exe file and select the compatibility tab and pick the best options. If that doesn't work I would try the receiver manufacturer.
     
  5. silverhawk

    silverhawk Auditioning

    Joined:
    Jan 31, 2012
    Messages:
    5
    Likes Received:
    0
    I hadn't heard of Compatibility Mode before. I tried several configurations of it, but it did not work for this program. However, it's worth noting for future use, I did contact Pioneer earlier, but their comment was that since there was nothing wrong with their AVNavigator program, the problem must lie somewhere in my computer. -- Any other suggestions?
     

Share This Page