I am a total newbie that doesn't know the difference between and ohm and a rock (information overload). I would like to know if I have the right idea or need direction. This is my setup: DIY Screen - blackout cloth/GOO paint Sanyo PLV-Z1 - (1) component video (1) s-video(1) computer-in Onyko HTS760 - (2) Optical (1) Coaxial (3)s-video (2) component video Adelphia Digital Cable - s-video (I am considering switching to Direct TV or Dish in near future) Projector is ceiling mounted about 20 feet away from the receiver and other hardware. If I got it right I should run a component video cable and an s-video cable to the Onyko receiver. Do I understand that the receiver can then act as a switch rather than buying a component video switch? I need to hook up an X-Box preferably with the HD Pack, a progressive scan DVD player, the digital cable box. We also have a Game Cube to consider at some point. If buying a component video switch is the way to go for adding the Game Cube and/or satellite, etc. I am very willing to do that if needed. I would appreciate your help as I find all this cabling a bit confusing.