Need help determining Wattage on Monsoon Computer Speaker System...

Discussion in 'Archived Threads 2001-2004' started by Brian Harnish, Sep 12, 2001.

  1. Brian Harnish

    Brian Harnish Screenwriter

    Joined:
    Dec 15, 2000
    Messages:
    1,216
    Likes Received:
    0
    My owner's manual does not list the wattage on the speakers I just bought (and the box doesn't either). The speaker system I got is the Monsoon MM-702 Flat Panel Audio System. In spite of not knowing the wattage, I am literally ENTHRALLED with how my MP3s sound. I'm hearing a whole midrange of sound, as well as bass and higher ranges (where applicable). They blow my older, cheaper speaker system out of the water!
    Anyways, the only specs listed in the manual are these:
    Satellites: 4x8" diple-radiating PFT Transducer
    Satellite Enclosure: None
    Total Amplifier Power: 49 Wmax^2, 35Wrms
    Crossover: Active, third order at 225Hz
    Subwoofer drive unit: 5.25 inch cone driver, Xmax = +_(should be + and - over eachother) 5mm
    Subwoofer cabinet: 6.75 liter bandpass, tuned to 110 Hz; 9.50" H x 7.25" W x 10.88" D
    Controls on Subwoofer: Bass volume and power on/off
    System frequency response: 50 Hz to 20 kHz (in workstation environment)
    Maximum SPL at 0.5 meters: 101 dB using EIA 426B noise
    ...if these will be of any help determining the wattage. Please let me know. [​IMG]
    ------------------
    - Brian
    My DVD Collection
    Want Sliders on DVD? Then please SIGN the petition!
     
  2. todbnla

    todbnla Screenwriter

    Joined:
    Oct 17, 1999
    Messages:
    1,514
    Likes Received:
    0
    Location:
    39466
    Real Name:
    Todd
    Sorry, those are the only specs shown on the website too. Looks like you may have to call them?
    The real company name, which you may know is "SONIGISTIX" and a search thru Yahoo will give you their URL.
    FYI
    ------------------
    Regards,
    Todd

    My HT
     

Share This Page