Mint Sherbourn PA 7-150 7 channel amplifier for Home Theater (less than 30 days old)

Discussion in 'Hardware Classifieds' started by Thomas P., Feb 7, 2012.

  1. Thomas P.

    Thomas P. Stunt Coordinator

    May 20, 2002
    Likes Received:
    This amplifier arrived brand new on Friday, 2/3/2012. I tested it and took pictures. Works perfectly. No hum. No hum in speakers at any volume. Exceptionally clean sound. Very cool, no heat!. I really could list it a 10/10. The audible diference between 150 watts and 200 watts about 1 db...extremely minimal. Everything that came with it is inlcuded. Power cord, trigger wire, owners manual, 5 year warranty, original packing. With its efficient Class A/B design, the PA 7-150 runs very cool, and so is ideal for situations where excess heat production is a problem. The elegant 17 inch wide sculptured front panel houses a master power switch and seven blue LEDs;audiophile-grade input and output connectors on the rear panel complete the picture. Here are the details: •150 watts per channel (x7) @ 8 Ohms (with no more than 0.05% THD from 20 Hz -- 20 kHz, all channels driven) • 220 watts per channel (x7) @ 4 Ohms (with no more than 0.05% THD from 20 Hz -- 20 kHz, all channels driven) • Power bandwidth: 5 Hz - 150 kHz • Signal to noise ratio: 110 dB / A weighted • Gain: 30 dB • Input impedance: 40 kOhms • Sensitivity: 1.1 volts • Dynamic headroom: 1.3 dB • Massive 1.2 kVA toroidal power supply • High efficiency, class A/B design • Trigger input / output • Power supply: 120 V / 60 Hz or 230 V / 50 Hz (selectable) • Carton weight: 84 lbs. • Dimensions: 17"W x 19"D x 7.5"H This represents a thousand dollar savings on an amplifier that is less than 30 days old so buyer pays shipping and PayPal.

Share This Page