Line Array in the works at Stryke Audio. (1 Viewer)

[Mark_J_H_Jr]

You guys crack me up. Remind me to spell check everyting, or Professor Bunge will take points off.

"Dueling Baffels"

 

[Brett DiMichele]

Brian,

Nah no Bavarian Mist Wagens..... (Look that up...)

Porsche humm.... NAH... You know what they say about
Porsches and Porcupines? The Porcupine has the pricks on
the outside!

Hahaha

 

[Brian Bunge]

Mark,

Like maybe the word "everyting"? Or maybe you're from Jamaica, Mon?

 

[Ellen]

This is right up there with the folks in the speaker forum that keep referring to "duel subs" when they are talking about running two at a time.

Yeah, whenever I see that, the devil in me wants to ask if it will be swords or pistols

 

[John Wes]

Any updates?

 

[Brett DiMichele]

John,


John J. has been busy packing and shipping AV-12's and 15's
for the current AV Pre Order but fret not. He has completed
the Test Cabinents (Veneered and Cleared) now he has to
work out the crossover design and do the measuring... Soon!

 

[Hank Frankenberg]

Speaker forum? What speaker forum? Brian, I thought I was the only one bothered by the bad spelling on the forums. I can cancel the therapy appointment today.

There's a guy here in Austin that incessantly (look it up) uses "an" instead of "a" in his sentences. I've posted hints and offered to get him a book on articles (not the magazine type), but just doesn't catch on.

Well, it's time for an cup of coffee now.

BTW, I just bought a 2001 330i BMW and I'm in love - named her Lucille (as in B.B. King's guitar).

 

[Brett DiMichele]

Hank,

Wanna race? Lets see if she is "The Ultimate Driving Machine"

And if loose I will even buy you one of those fancy Tequilia's
you always speak of... (Yeah I bet I spelled that one way
wrong!)

What do you expect.. I only gradeated the third grade!

 

[Brian Bunge]

Hank,

You know, in the hardware section? Speakers and Subwoofers?

BTW, YGM.

 

[John E Janowitz]

Hi Everyone,

I finally got this array finished. If anyone wants to copy over the measurements, etc feel free to do so. Here's the link to the thread on my forum with all the pictures, measurements, etc.

http://forum.stryke.com/viewtopic.php?t=85

I need to get outside and do some measurements without any room reflections yet, but at this point I am very happy with the results. Xover schematic will be posted later today.

John

 

[Dan Pawlowski]

Nice goin' John, you just gave me the "line array" Bug
Like I dont have enough DIY projects on the go.
Great job!

Dan

 

[John Wes]

Hummm.....

*goes searchin' through the couch for lost change*

Those are not only impressive looking but beautiful as well..

 

[John Wes]

Well it seems I've come up a bit short after checking out the couch, pants pockets and loose change laying around...

Plan b..Whine to wife........

I'm surprised this thread doesn't garner more interest. Those look to be one killer of a deal. I'll succumb sooner or later but doubt I'll make it by the Oct.10 deadline for the better deal.

One question, the baffles, are they already cupped on the backside of the woofers? I know it was mentioned that the CNC machine could'nt do that.

 

[John E Janowitz]

Hi John,

The baffles are not cut on the back sides. That is something not completely necessary, but nice to do if you can. Right now with the deal I am offering, the baffles are pretty much included for free. I just don't have the time to do all the notches too though.

For those interested, the Xover schematics are now up on the thread on the forum at:

http://forum.stryke.com/viewtopic.php?t=85

Full CAD plans will be up shortly as well. If anyone is interested in the pair of line arrays shown during the build process, please contact me.

John