Hey all! I'm new around here, so I hope I'm posting in the right forum. Anyways.... For well over a year now my wife has been happy with our home theater setup, I of course not so much, but thats a different topic that will be touched on in a bit. I have a LG 32LC7D TV, LG E922PB HTIB, Xbox360, and a Pace dual DVR (model number escapes me at this time) I'm fairly limited in my connections... as the TV came first it's been a bit of a pain, I didn't think ahead. The TV has two HDMI hookups. and I have 3 HDMI devices. So my setup is: Xbox - HDMI - TV DVR - HDMI - TV HTIB - Component - TV TV - Optical - HTIB For 12 months this has been fine. In fact the TV never moved, and wires never tugged for those 12 months and the Harmony, while frustrating, operated fine. Now the wife got in her head that the book shelf the Xbox was on (which was in a seperate corner of the room) should go away cus it's ugly (which it was) and the Xbox should join the HTIB and TV on the small TV stand we have. So after that move, there was a loud squeal from the HTIB a week after it was hooked up, and now I cannot get any audio out of the HTIB unless I use RCA cables. To make matters worse, after trying to reconfigure my harmony remote (550) I can no longer get the stupid setup program to "save" the command to switch between digital inputs (because the factory remote switches between AUX OPT and AUX COAX on a single button, while all other inputs are selected by single buttons). The command is listed in the setup screen, but when I say "done" it doesn't save the command to setup screen...or when transfered to the remote the remote does not see the command either. I do not have the factory remote... the HTIB was an AS-IS purchase. This is driving me nuts because 5.1 sounds is very important to me (and she could care less about 5.1 or audio quality, in fact the TV speakers are fine for her) So now I'm in a bit of a slide... I have given up on the HTIB box... I've replaced all the cables with brand spanky new Planet Waves ones and still nothing.... so I belive the input is fried, or the software is pooched... one of the two. I have convinced the wife it's time to upgrade! But there are limitations...by her, the pocket book, and technical. 1: I have very limited room. the current HTIB is thicker than an Xbox and i only have 1 inch of verticle space left with the HTIB and a Wii stacked. I am not allowed to put the wii verticle on the side (this is her) 2: It must be black to match the rest of the system (also her) 3: It must be in the $500 - $1000 CAD price range 4: Perfer to be a 5 disc changer (her) 5: I want Blu-Ray 6: Would perfer it to have HDMI in/outs 2+ 7: 5.1 setup, with wall mount rear speakers (physical limition) 8: Auto audio balancing (perfered) This is what I would like essentially... 5 disc HTIB Xbox 360 Pace DVR Blu-Ray player all hooked up through HDMI. Keep in mind my TV only has 2 HDMI ports I could probably get her to ditch the 5 disc changer, or if there is a thin enough one out there add it at a later date and just hook it up through component, and then have a Bluray HTIB Please help... Oh, and I need to buy from a place that sells extended warranty. It has saved me in the past and I should have gotten it with this system.