Interesting findings on Sony 36" WEGA TV (KV-HR36M61)

Discussion in 'Displays' started by ChongLM, May 23, 2004.

  1. ChongLM

    ChongLM Auditioning

    Joined:
    Dec 4, 2003
    Messages:
    4
    Likes Received:
    0
    It appears that the above mentioned TV set is able to support native 720p mode (barely).

    I managed to connect my PC to the TV via the ATI HDTV connector and played with all the various modes available.

    There is no comparison displaying my desktop in 720p mode compared to 1080i mode, since the latter is noticeably flickering and the text is too small to view clearly, although the resolution is much higher.

    However, to achieve a full display of any 720p source, you'll need to go into the service menu and do some adjustments. This is because I'm making use of the additional scanlines which would normally be hidden from view.

    With ALL the scanlines utilized, I'm able to get a full screen display with slight distortions at the extreme corners.

    Do note that doing so would also reduce the display image size of all other sources (e.g. TV broadcast, DVD signal) on your TV since the adjustment is applicable to the TV in general and not specific to any signal or display modes (you'll see black borders on top & bottom and/or left & right).
     

Share This Page