How do I use DTS:neo with dvd's??

Discussion in 'Archived Threads 2001-2004' started by Brian Fineberg, Sep 18, 2001.

  1. Brian Fineberg

    Brian Fineberg Second Unit

    Joined:
    Sep 1, 2000
    Messages:
    256
    Likes Received:
    0
    I can use it for prologic vhs but whenever I use dvd's that are proloic it just automatically uses the prologic decoder(oh by the way I am using a Denon 3801, that might help huh) Anyway any comments would be greatly appreciated!!
     
  2. DavidMich

    DavidMich Stunt Coordinator

    Joined:
    Nov 27, 2000
    Messages:
    177
    Likes Received:
    0
    Push the "DD/DTS Surround" Button on the remote. It should switch to DTS NEO 6:C (Cinema Mode) or M (Music Mode). The mode can be selected by using the "Surround Parameter" button. Hope this helps.....
    ------------------
    The choices we make define our lives, because choice, not chance, determines destiny.
     
  3. Nestor Vargas

    Joined:
    Dec 13, 2000
    Messages:
    27
    Likes Received:
    0
    In the 3801 like in the 5800 when a Dolby Digital source be it 1.0, 2.0, 5.1, etc. connected through digital connection the Denon Locks in Dolby decoding. If you want to use DTS NEO with those sources you must use the analog inputs.
    ------------------
    ¡Que vivan las películas en su formato original!
     
  4. Joseph Kim

    Joseph Kim Agent

    Joined:
    Jan 14, 1999
    Messages:
    44
    Likes Received:
    0
    You can use analog outputs, or you can go into your dvd player menu and switch the bitstream to pcm.
    joe
     

Share This Page