Help Please....Pre-wiring for FP

Discussion in 'Displays' started by Cali, Apr 8, 2003.

  1. Cali

    Cali Auditioning

    Joined:
    Apr 6, 2003
    Messages:
    12
    Likes Received:
    0
    I need to prewire for a fptv and I cannot use the smurf tube.I got the 2" smurf tube and unless I make my cieling a funky shape I cannot use it.

    So I am going to have to run cables directly and it has to be done today. I have been told to run RGBHV cable and cat5 from audio cabinet to projestor area.

    I am leaning toward the infocus 7200 projector if that affects the decision. Would choosing the Dwin make my dilemna any easier since it comes with a controller box?

    Need all the advice I can get.

    Thanx,
    Max
     
  2. Bill Lucas

    Bill Lucas Supporting Actor

    Joined:
    Mar 20, 1999
    Messages:
    530
    Likes Received:
    0
    Two runs of RGBHV, A Cat5E, and two 20/4 wires for future control and triggering should do the job. The two runs of RGBHV can give you multiple S-Video, Composite or component video or RGBHV of VGA with an adapter cable. Regards.
     
  3. Cali

    Cali Auditioning

    Joined:
    Apr 6, 2003
    Messages:
    12
    Likes Received:
    0
    Thank you for your response Bill.
    I ran Extron 6BNC cable and cat5, everything is ready for drywall in the morning.

    Thanx again,
    Max
     

Share This Page