Denon 3803 Setup Question

Discussion in 'Archived Threads 2001-2004' started by John_I, Feb 26, 2003.

  1. John_I

    John_I Auditioning

    Joined:
    Feb 23, 2003
    Messages:
    13
    Likes Received:
    0
    Hi, Do I have to run setup on the receiver before I can listen to anything? I wanted to do a quick comparison between my existing setup and the 3803. I hooked up the 3803 to a cd player and then my front speakers and played a cd. There was no volume at all until the volume was at max and even then the level was faint. I thought maybe channel levels have to be set before you could listen to anything or I have a defective unit. Thanks!!
     
  2. rodney wiley

    rodney wiley Second Unit

    Joined:
    Nov 23, 2001
    Messages:
    310
    Likes Received:
    0
    Most likley you have to assign your inputs. So yes you must do a minor setup first.
     
  3. JeremySt

    JeremySt Screenwriter

    Joined:
    Aug 19, 2001
    Messages:
    1,777
    Likes Received:
    14
    Real Name:
    Jeremy
    yes, you have to do setup. you have to tell the receiver how many speakers you have, calibrate levels, assign inputs. dont do any serious auditioning until this is complete.
     

Share This Page