A couple weeks ago I gutted my theater. I removed everything, right down to the seating, risers and flooring. I wanted to flip the room, put the screen where the seating was and vice versa. The main reason for doing this was that it allows me to go from an 82" screen to a 96" screen. Pics from 2 weeks ago. The old screen, screen wall and gear is all out and the PJ is mounted in it's new location. The old seating area where the new screen, gear will go. http://img.photobucket.com/albums/v377/Ron-P/T1-1.jpg[/img]]"> Pics from today. New new riser is built with the 3 chairs bolted in. The new 96" screen is hung, the gear is all wired up and the rig is running. Still a lot to do; molding, painting, carpeting, trim work, wire management...etc. But for the most part, the bulk of the hard work is done.