Are my Comcast 5100 settings correct?

Discussion in 'Displays' started by William Gibbons, May 31, 2003.

  1. William Gibbons

    William Gibbons Auditioning

    Joined:
    May 28, 2003
    Messages:
    3
    Likes Received:
    0
    Just got Comcast to put in the HDTV box and I wanted to confirm my settings.

    My TV is 16:9

    It is set for 16:9
    YPbPr is set for 1080i, for some reason 720p doesnt work.
    4:3 Override is OFF

    Are those settings correct. The picture on both non HD and HD are great, so I'm assuming everything is cool.

    Here is my problem:
    Before getting the HD box, I had PIP and POP. Now there is a message at the bottom of the screen saying PIP does not work with INP-DTV. Is that right? I can't use any of my PIP/POP features of the television in DTV mode?
     
  2. BrianDB

    BrianDB Agent

    Joined:
    Feb 16, 2003
    Messages:
    43
    Likes Received:
    0
    I am presuming that you Set will not accept a 720p signal. And no you may not use PIP with the Component Inputs. My suggestion is to connect all of the outputs from the 5100 to your set. That means Component, S-video, Composite, and RF. Also route the cable through your Set and then into the 5100 and you should be able to PIP the different sources as long as they are not composite.
     

Share This Page