A basic cableing question -- My brain ain't working today

Discussion in 'Beginners, General Questions' started by Robt_Moore, Jun 7, 2003.

  1. Robt_Moore

    Robt_Moore Stunt Coordinator

    Joined:
    Feb 27, 2002
    Messages:
    66
    Likes Received:
    0
    I thought I knew the answer, but alas, my brain isn't cooperating.

    I finally ordered a new receiver today to replace my old Technics Dolby Surround(circa 1988!) with a Denon AVR-883. I'm taking inventory of the cables I have, and once I have the answer to the following question, then I can buy my missing cables:

    If I have a source that has a digital audio output, do I even need to connect the analog audio outputs to the receiver?

    For example, LD to receiver? DVD to receiver? SAT box to receiver?

    Here are model numbers, if that helps.
    LD PIO CLD-D702
    DVD PAN DVD-F85K
    SAT SAM SIR-75

    I really would like to eliminate any redundant cables (and keep a few bucks) if possible.

    And I am working on my wiring diagram so it can be double checked; I may post it later if someone wants to "grade" it.

    Thanks for everyone's help.

    Bob
     
  2. Wayne A. Pflughaupt

    Joined:
    Aug 5, 1999
    Messages:
    6,043
    Likes Received:
    17
    Location:
    Katy, TX
    Real Name:
    Wayne
    Bob,

    Generally no, you don’t have to connect the analog audio outputs for digital equipment. There are a few caveats, however:
    • If you ever intend to record any of these sources to a VCR or other recorder with analog-only inputs, you will get no audio to it if you’re using only digital connections.
    • As you may know, laser disc player is different from a DVD player or satellite receiver. Its output is an RF signal that has to be demodulated to Dolby Digital. Few receivers have an on-board demodulator.
    Regards,
    Wayne A. Pflughaupt
     

Share This Page